72
Chapter 4.
Settings and Upgrade
Adding cards
Check that there are slots which can be used for expansion and
then check that the card you want to install is compatible with
your computer.
1
Remove the bracket from the slot you wish to use for
installation.
Insert a Phillips (cross-shaped) screwdriver into the slot and
tilt it toward the outside, then shake from side to side to
detach the bracket.
Be careful not to cut your hand on the bracket edges.
2
Open the computer cover.
3
Remove the screw holding the bracket.
4
Insert the card in the slot and push so it is completely
inserted.
If the card is not completely inserted, the computer may not
operate correctly or the card or main board may be damaged.
(for 400T8A models only)
