Source AutoSwitch
When the
Source AutoSwitch
is
On
, the display video source will automatically be searched
for active video.
The
Primary Source
selection will be activated, if the current video source is not recognized.
Secondary source
selection will become active, if no primary video source is available. If
the primary or secondary source is not recognized, the display will search again, if no active
video is found the display will show the no-input-signal message.
When the
Primary Source
selection is set to
All
, the display will search all the video source
inputs twice in sequence looking for an active video source, returning back to the first video
source in the sequence if no video is found.
1.
Off
2.
On
Primary Source Recovery
When
Primary Source Recovery
is
On
, only the
Primary Source
and
Secondary
Source
video source selection will be searched for active video.
The
Primary Source
will be selected if active video is found, if no video is found, the
Sec-
ondary Source
will be selected, if no video is found in
Secondary Source
again, the no-
input-signal is displayed.
1.
Off
2.
On
Primary Source
Adjusting the LCD Display
