English-33
Display Modes
PowerSaver
This set has a built-in power management system called PowerSaver. This system saves energy by
switching your set into a low-power mode when it has not been used for a certain period of time.
The available modes are “On”, “Standby”, “Sleep”, and “Deep Sleep”. PowerSaver operates with a
VESA DPMS compliant video card installed in your computer. You use a software utility installed on
your computer to set up this feature.
State
Normal Operation
Power-Saving Function mode (EPA/NUTEK)
Horizontal Sync
Active
Inactive
Vertical Sync
Active
Inactive
Power Indicator
Green
Green, Blinking (1 sec interval)
Power Consumption
SyncMaster 211MP : 110W (Max.)
Less than 8W
SyncMaster 241MP : 120W (Max.)
➣
This set automatically returns to normal operation when horizontal and vertical sync return.
This occurs when you move the computer’s mouse or press a key on the keyboard.
If the signal from the system equals to the standard signal mode, the screen is adjusted automatically.
If the signal from the system doesn’t equal to the standard signal mode, adjust the mode with referring
to the Video card user guide because the screen might not display or only the power LED might be on.
For the display modes listed below, the screen image has been optimized during manufacture.
Mode
Resolution
Horizontal
Vertical
Pixel Clock
Sync Polarity
Frequency (kHz)
Frequency (Hz)
Frequency (MHz)
(H/V)
VGA
720 x 400
31.469
70.087
28.322
- / +
640 x 480
31.469
59.940
25.175
- / -
640 x 480
37.500
75.000
31.500
- / -
640 x 480
43.269
85.008
36.000
- / -
SVGA
800 x 600
46.875
75.000
49.500
+ / +
800 x 600
53.674
85.061
56.250
+ / +
XGA
1024 x 768
48.363
60.004
65.000
- / -
1024 x 768
60.023
75.029
78.750
+ / +
1024 x 768
68.677
84.997
94.500
+ / +
SXGA
1280 x 1024
63.981
60.020
108.000
+ / -, + / -
1280 x 1024
79.976
75.025
135.000
+ / +
UXGA
1600 x 1200
75.000
60.000
162.000
+ / -, + / -
WUXGA
1920 x 1200
75.000
60.000
193.156
+ / -, + / -
(SyncMaster 241MP)
rubens_monitor_eng 1/28/03 8:40 PM Page 33