English
05
Setup
Setup
Before Starting (Initial Settings)
Turn on your TV after connecting the player.
(When the player is connected to TV for the
first time, the player will turn on automatically
and display the Initial Settings screen.)
Press the ▲▼ buttons to select the desired
language, then press the
ENTER
button.
Press the
ENTER
button to select
Start
.
Press the ▲▼ buttons to select the desired
TV aspect ratio, then press the
ENTER
button. (See page 32)
1.
2.
3.
4.
Press the ◄► buttons to select the desired
Network Settings :
Wired
,
Wireless
or
PBC
(WPS)
, and then press the
ENTER
button.
If you do not know your Network Settings,
press the
BLUE (D)
button on your remote
instead to skip Network Settings here, finish
the Initial Settings, and go to the Home menu.
If you selected a Network Setting, go to
pages 38~42 for more information about the
Network settings. When done, go to Step 6.
Press the
OK
button.
The Home menu is displayed. For more
information about the Home menu, please
see page 30.
Home Menu
NOTE
When the player is connected to a TV for the first
time, player will turn on automatically.
This is not malfunction.
The Home menu will not appear if you do not
configure the initial settings except as noted below.
If you press the
BLUE (D)
button during the network
setup, you can access the Home menu even if the
network setup is not completed yet.
When you return to the Home menu, the full screen
mode is cancelled automatically.
If you want to display the Initial Setting screen again
to make changes, press the
STOP
( ) button on
the front panel of the player for more than 5 seconds
with no disc inserted.
5.
6.
•
✎
▪
▪
▪
▪
▪
internet radio
You Tube
No Disc
a
Change Device
d
View Devices
"
Enter
Please activate Internet@TV service
to enjoy a variety of Internet Services.
a
Previous
"
Select
Initial Settings
TV Aspect and Network will be set.
Each setting may be changed later under "Settings"
Start
a
Previous
d
Skip
<
Move
"
Select
Initial Settings I Network
Network Setting is needed to use various Internet services.
Choose the primary method for connecting to network.
Wired : Set the network connection using Ethernet cable. Please make sure that
Ethernet cable is connected.
Wired
Wireless
PBC (WPS)
>
Move
"
Select
Initial Settings I On-Screen Language
Select a language for the on-screen displays.
English
Français
Deutsch
Español
Italiano
Nederlands
Svenska
01945B-BD-C6900-XAC-ENG.indb 29
2010-02-22 오후 10:22:17