7.5.1 Activating/deactivating functions
1. Click on the
Configuration #1 or Configuration #2 folder.
The function block settings in the selected level are displayed.
2. Change settings:
Double-click the function block status (
0
or
I
) to change the status of the function.
Right-click on a row to open a pop-up
window to modify configuration settings:
[Modify]
Opens pop-up window to change the status of the function block.
[Read]
Uploads status of the function block from device.
Displayed only in offline mode (see section 8.1.1)
[Write]
Downloads status of the function block to device.
Displayed only in offline mode (see section 8.1.1)
[Default: ...]
Resets function block to default setting (setting in gray to indicate that
the status of function block is the same as the default setting)
EB 5757-7 EN
35
Configuration and operation using TROVIS-VIEW interface