Samson TROVIS 5724-3, Монтаж и эксплуатация

Страница: 35 / 72

EB 5724 EN 8-1
Operation
8 Operation
The valve with electric actuator is ready for use when mounting and start-up have been com-
pleted.
Operation disrupted by a blocked actuator or plug stem (form-fit version).
Î
Do not impede the movement of the actuator or plug stem by inserting objects into their
path.
8.1 Closed-loop control
The electric actuator with process controller normally operates in closed-loop operation. In
this case, the control behavior and movement of the actuator stem depend on the parameter
settings (see Configuration Manual
u
KH 5724).
Applications
− Pt 1000 sensors
− Pt 1000 sensor with binary contact BI1 to switch between set points
− Pt 1000 sensor with flow switch (BI2)
− Pt 1000 sensor with water flow sensor
− Pt 1000 sensor with set point guided by current input
−
Current signal (actual value)
− Pump control using switching output
8.2 LED blinking pattern
The state of the corresponding
LED (on/off) is shown over time.
On
Off
Gray: LED illuminated
White: LED not illuminated
Time in s
NOTICE
!