Samson S Class, Руководство пользователя

Страница: 6 / 20

4
STEREO/MONO
CROSSOVER
MASTER CONTROLS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
23
24
25
26
19
20
21
22
Controls and Functions
FR
ONT P
ANEL LA
Y
OUT
1 INPUT
GAIN
- Used to adjust the input gain from
–12dB to +12dB.
2
INPUT METER (CH 1)
– Four-segment LED VU
meter displays the amount of level present at the Channel 1, or left, input.
3
DELAY (CH 1)
– This control is used to adjust the
delay line from 0 to 2ms, for time aligning the low frequency output.
4
LOW GAIN (CH 1)
- Adjusts the output level of the
LOW frequency band for the left in stereo 2-way mode, or for the LOW band in mono 3-way mode.
5
FREQUENCY (CH 1)
- This control sets the
crossover point dividing the frequency bands from low-to-high in stereo 2-way mode, or from low-to-mid when you are operating in mono 3- way mode.
6
HIGH GAIN (CH 1)
- Adjusts the output level of
the HIGH frequency band for Channel 1 in stereo 2-way mode, or for the MID band in mono 3-way mode.
7
PHASE Switch (MID / HIGH CH1)
- Used to invert
the phase on the left HIGH output in stereo 2-way mode, or the MID output in mono 3-way mode.
8
MUTE Switch (MID / HIGH CH 1)
- This switch is
used to defeat the output for the HIGH frequency output when operating in stereo 2-way mode, or to defeat the MID frequency output when operat- ing in mono 3-way mode.
9
OPERATING MODE SELECTOR
- Selects one of the 2
operating modes, 2-way stereo or 3-way mono.
10
PHASE Switch (HIGH CH2)
- Used to invert the phase
on the right HIGH output in stereo 2-way mode, or the HIGH output when operating in mono 3-way mode.
11
MUTE Switch (HIGH CH 2)
- This switch is used to
defeat the output for the HIGH frequency output when operating in stereo 2-way mode, or to defeat the HIGH frequency output when operating in mono 3-way mode
12
INPUT METER (CH 2)
– Four-segment LED VU meter dis-
plays the amount of level present at the Channel 2, or lright input.
13
INPUT GAIN
- Used to adjust the input level from –12dB
to +12dB.
14
DELAY (CH 2)
– This control is used to adjust the delay
line, from 0 to 2ms, for time aligning the channel 2 low frequency output. This control has no effect when oper- ating in stereo 3-way mode.
15
LOW GAIN CONTROL (CH 2)
- Adjusts the output level
of the LOW frequency band for right in stereo 2-way mode. This control has no effect when operating in stereo 3-way mode.
16
FREQUENCY CONTROL (CH 2)
- This control sets the
crossover point dividing the frequency bands from low- to-high in stereo 2-way mode, or from mid-to-high when you are operating in mono 3-way mode.
17
HIGH GAIN CONTROL (CH 2)
- Adjusts the output level
of the HIGH frequency band for Channel 2 in stereo 2- way mode, or for the HIGH band in mono 3-way mode.
18
MAIN POWER Switch
- When this switch is engaged, the green
LED will illuminate indicating that the S 2-way is powered up and ready for operation.
19
HPF Switch (CH1)
- Engages the High Pass Filter, or low cut, rolling
off the low frequencies at 25Hz, by12 dB per octave, helping to reduce unwanted low frequency rumble.
20
RANGE Switch (CH 1)
– This switch is used to change the frequen-
cy range of the crossover filter from 35 Hz to 800 Hz, or from 350 Hz to 8 kHz when the switch is engaged.
21
PHASE Switch (LOW CH1)
- Used to invert the phase on the
leftLOW output in stereo 2-way mode, or the LOW output when operating in mono 3-way mode.
22
MUTE Switch (LOW CH1)
- This switch is used to defeat the LOW
frequency output when operating in stereo 2-way mode, or to defeat the LOW frequency output when operating in mono 3-way mode.
23
PHASE Switch (LOW CH2)
- Used to invert the phase on the right
LOW output in stereo 2-way mode. This control has no effect when operating in stereo 3-way mode.
24
MUTE Switch (LOW CH 2)
- This switch is used to defeat the out-
put for the right LOW frequency output when operating in stereo 2-way mode. This control has no effect when operating in stereo 3- way mode.
25
HPF Switch (CH2)
- Engages the High Pass Filter, or low cut, rolling
off the low frequencies at 25Hz, by12 dB per octave, helping to reduce unwanted low frequency rumble. This control has no effect when operating in stereo 3-way mode.
26
RANGE Switch (CH 2)
– This switch is used to change the frequen-
cy range of the crossover filter from 35 Hz to 800 Hz, or from 350 Hz to 8 kHz when the switch is engaged.