Samson MDR 16, Руководство пользователя

Страница: 8 / 32

Front and Rear Panel Layout
6
REAR PANEL
A AC ADAPTER INLET – Connect External AC power AC ADAPTER INLET AC ADAPTER INLET
supply here.
B POWER – Switches on the MDR16’s main power.
C PHANTOM – Engages the 48-Volt Phantom
power supply to microphone pre-amps.
����� ������� �����������
�� ��
�������������
������������������
�����
� �
�
�
� � �
43 MONO OUT – The Left and Right main Mix outputs are
summed together to a monaural signal and sent out this
connector.
44 EQ IN/OUT
– When pressed in, the Amber LED will illu-
minate indicating that the Graphic Equalizer is active.
45 AUX RETURN 2
– This control knob is used to adjust
the level of the signal connected to the AUX RETURN 2
inputs.
46 EQ TO AUX - When pressed in, the onboard Graphic
Equalizer is switched from the main mix to the AUX 1
output.
47 SOLO (AUX RETURN 2 ) - Back-lit LED switch used to
assign the AUX RETURN 2 bus to the SOLO bus.
48 +48 PHANTOM POWER LED
– Indicates that the 48 Volt
Phantom Power is on.
49 POWER LED
– Indicates the MDR16 is powered up.
50 SOLO LED
– Indicates SOLO is selected.
51 PFL LED
– Indicates the SOLO is in PFL (Pre-Fader Level)
mode.
52 OUTPUT METER – Twelve-segment display with VU bal-
listics indicates main Mix level.
53 DSP AUX 1 - This control knob is used to adjust the level
of the internal DSP effect in the AUX 1 outputs
54 DSP ON – This push switch is used to engage the
onboard DSP effects.
55 DSP PRE-SET SELECT – Used to switch between the 8
pre-sets of the internal DSP effects processor.
56 SOLO Switch (3/4 Bus)
– Back-lit LED switch used to
assign the 3/4 Bus to the SOLO bus.
57 SOLO/PFL Switch
– Used to change the operating mode
of the SOLO bus from SOLO to PFL (Pre Fader Listen).
58 3/4 TO MIX Switch – When engaged, the LED lights and
the input channels which are assigned to 3/4 will be
mixed together with the Main Left and Right Outputs.
59 MIX MUTE Switch – When the switch pressed, the red
LED lights indicating the Main Left and Right outputs are
fully attenuated.
60 SOLO DEFEAT Switch
– This global control, back-lit
switch is used to disconnect all channels from the SOLO
bus.
61 MIX L R FADER - Used to control the overall volume of
the Left and Right main Mix outputs.
62 HEADPHONE JACK – Connect stereo headphones here. 62 HEADPHONE JACK 62 HEADPHONE JACK
63 C ROOM + HEADPHONE – Adjusts the volume of the
control room speakers or headphones.
64 SOLO LEVEL
– A rotary control knob used to set the
overall volume of the SOLO bus.
65 MIX/2TK
– Switches between the main Mix and the 2
Track in the Control Room output.
66 OUTPUT 4 FADER – Used to control the overall volume
of the bus 4 mix output.
67 OUTPUT 3 FADER – Used to control the overall volume
of the bus 3 mix output.
68 OUTPUT 2 FADER
– Used to control the overall volume
of the bus 2 mix output.
69 OUTPUT 1 FADER
– Used to control the overall volume
of the bus 1 mix output.
70 1/2 TO MIX – When engaged, the LED lights and the
input channels which are assigned to 1/2 will be mixed
together with the Main Left and Right Outputs.
71 SOLO (1/2 Bus) – Back-lit LED switch used to assign the
1/2 Bus to the SOLO bus.
72 DSP 3/4 –
This control knob is used to adjust the
level of the internal DSP effect in the Bus 3/4 out-
puts
73 SOLO (AUX RETURN 1) – Back-lit LED switch used to
assign the AUX RETURN 1 to the SOLO bus.
74 DSP 1/2 -
This control knob is used to adjust the
level of the internal DSP effect in the Bus 1/2 out-
puts
75 DSP PEAK LED – LED light illuminates when the signal
sent to the internal DSP is clipped.
76 AUX RETURN 1 Knob
– Used to mix in level of the
external effects connected to the Aux RETURN 1 inputs.
77 3/4 ASSIGN
– LED, back-lit switch used to assign the
channel to the 3/4 output bus.
78 1/2 ASSIGN (Stereo Channels) – LED, back-lit switch
used to assign the channel to the1/2 output bus.
79 SOLO Switch (Stereo Channels) – Back-lit LED switch
used to assign the channel to the SOLO bus.