manualshive.com logo in svg

Samson 5827, Монтаж и эксплуатация, Страница: 57 / 92

Поделиться
Скачать
Samson 5827 Скачать руководство пользователя страница 57

EB 5827-2 EN 

 10-1

Servicing

10 

Servicing

The work described in this section is only to 
be performed by personnel appropriately 

qualified to carry out such tasks.

The electric actuator was checked by 
SAMSON before it left the factory.
− The product warranty becomes void if 

service or repair work not described in 
these instructions is performed without 
prior agreement by SAMSON's After-sales 
Service.

The actuator requires no maintenance.
We recommend inspection and testing ac-
cording to Table 10-1.

Table 10-1: 

Recommended inspection and 
testing

Inspection and testing

Action to be taken in the event of a negative 

result

Check the markings, labels and nameplates on 

the electric actuator for their readability and com-

pleteness.

 

Î

Immediately renew damaged, missing or 

incorrect nameplates or labels.

 

Î

Clean any inscriptions that are covered with 

dirt and are illegible.

Check the electric wiring.

 

Î

If any wires are loose, tighten the terminal 

screws (see the 'Installation' section).

 

Î

Renew damaged wires.

Note

Содержание 5827





























































































Отзывы:

Нет отзывов