Samson 5312-2, Монтаж и эксплуатация

Страница: 18 / 44

5-2 EB 5207 EN
Installation
5.4 Electrical connection
Risk of fatal injury due to electric shock.
Î
Upon installation of the electric cables,
you are required to observe the regula-
tions concerning low-voltage installations
according to DIN VDE 0100 as well as
the regulations of your local power sup-
plier.
Î
Use a suitable voltage supply which
guarantees that no dangerous voltages
reach the device in normal operation or
in the event of a fault in the system or
any other system parts.
Î
Connect the grounding conductor to the
PE terminal.
1. Insert the connecting cable through the
cable gland into the housing.
2. Connect the wires of the connecting ca-
ble to the terminals.
3. Route the grounding conductor to the PE
terminal inside the housing.
4. Close housing cover. Insert and tighten
screws.
2
1
4
Fig. 5-1: Electrical connection
DANGER !