Samson 41-73 Series, Монтаж и эксплуатация

Страница: 9 / 78

EB 2517 EN 1-5
Safety instructions and measures
1.2 Notes on possible personal injury
WARNING !
Crush hazard arising from moving parts.
The regulator contains moving parts (set point springs), which can injure hands or fin -
gers if inserted into the regulator.
Î
Do not insert hands or fingers between the set point springs while the regulator is
in operation.
Î
Do not insert hands or fingers between the pillars and set point springs while the
regulator is in operation.
Î
Do not insert hands or fingers between the spring plate and crossbeam while the
regulator is in operation.
Î
Before performing any work on the regulator, depressurize the plant. Disconnect or
shut off the control line.
Risk of personal injury through incorrect operation, use or installation as a result of
information on the regulator being illegible.
Over time, markings, labels and nameplates on the regulator may become covered
with dirt or become illegible in some other way. As a result, hazards may go unno -
ticed and the necessary instructions not followed. There is a risk of personal injury.
Î
Keep all relevant markings and inscriptions on the device in a constantly legible
state.
Î
Immediately renew damaged, missing or incorrect nameplates or labels.
Risk of personal injury due to residual process medium in the regulator.
While working on the regulator, residual process medium can escape and, depending
on its properties, may lead to personal injury, e.g. (chemical) burns.
Î
If possible, drain the process medium from all the plant sections affected and the
regulator.
Î
Wear protective clothing, safety gloves and eye protection.