background image

EB 8547 EN 

 11

Measures for preparation

4  Measures for preparation

After receiving the shipment, proceed as fol-
lows:
1.  Check the scope of delivery. Compare 

the shipment received with the delivery 
note.

2.  Check the shipment for transportation 

damage. Report any transportation dam-
age.

4.1  Unpacking

Do not remove the packaging if the quick 
exhaust valve is to be transported to another 
location or kept in storage.

Before mounting the quick exhaust valve, 
proceed as follows:
1.  Remove the packaging from the quick 

exhaust valve.

2.  Dispose of the packaging in accordance 

with the valid regulations.

Risk of damage to the quick exhaust valve 
due to foreign particles entering the valve.

Do not remove the protective film until imme

-

diately before mounting.

4.2  Storage

Risk of damage to the quick exhaust valve 
due to improper storage.
Observe the storage instructions. Contact 
SAMSON, if need be.

Storage instructions

 

Protect the quick exhaust valve against 

external influences (e.g. impact, shocks, 

vibration).

 

Do not damage the corrosion protection 
(coating).

 

Protect the quick exhaust valve against 
moisture and dirt. In damp spaces, pre-
vent condensation. If necessary, use a 
drying agent or heating.

 

Observe the storage temperature from 

–40 to +80 °C.

 

Pack the quick exhaust valve in airtight 
packaging.

Note

NOTICE

!

NOTICE

!

Содержание 3711





















Отзывы: