Samson 3525, Монтаж и эксплуатация

Страница: 9 / 56

EB 8823 EN 9
Safety instructions and safety measures
1.3 Notes on possible property damage
NOTICE !
Risk of valve damage due to contamination (e.g. solid particles) in the pipeline.
The plant operator is responsible for cleaning the pipelines.
Î
Flush the pipelines before start-up.
Î
Observe the maximum permissible pressure for both the valve and plant.
Risk of valve damage due to unsuitable medium properties.
The valve is designed for a process medium with defined properties.
Î
Only use the process medium specified for sizing the valve.
Risk of leakage and valve damage due to excessively high or low tightening torques.
Excessively tightened torques lead to parts wearing out quicker. Parts that are too loose
may cause leakage.
Î
Observe the specified tightening torques (see Table 5 and Table 6).
Risk of valve damage due to the use of unsuitable lubricants.
The lubricants to be used depend on the valve material. Unsuitable lubricants may cor-
rode and damage the valve surface.
Î
Only use lubricants approved by SAMSON (see parts list).