background image

6  

EB 8059 EN

Safety instructions and measures

Personal protective equipment

We recommend checking the hazards posed by the process medium being used (e.g. 

u

 GESTIS (CLP) hazardous substance database).

 

Î

Provide protective equipment (e.g. safety gloves, eye protection) appropriate for the pro

-

cess medium used.

 

Î

Wear hearing protection when working near the valve.

 

Î

Check with the plant operator for details on further protective equipment.

Revisions and other modifications

Revisions, conversions or other modifications of the product are not authorized by SAMSON. 
They are performed at the user's own risk and may lead to safety hazards, for example. Fur

-

thermore, the product may no longer meet the requirements for its intended use.

Safety devices

Upon supply air or control signal failure, the valve moves to its fail-safe position (see sec-

tion 3.1). The fail-safe action of the actuator is the same as its direction of action and is spec

-

ified on the nameplate of SAMSON actuators (see actuator documentation).

Warning against residual hazards

To avoid personal injury or property damage, plant operators and operating personnel must 

prevent hazards that could be caused in the control valve by the process medium, the operat

-

ing pressure, the signal pressure or by moving parts by taking appropriate precautions. They 

must observe all hazard statements, warning and caution notes in these mounting and oper

-

ating instructions, especially for installation, start-up and service work.

We also recommend checking the hazards posed by the process medium being used (e.g. 

u

 GESTIS (CLP) hazardous substance database).

 

Î

Observe safety measures for handling the device as well as fire prevention and explosion 

protection measures.

Responsibilities of the operator

The operator is responsible for proper operation and compliance with the safety regulations. 
Operators are obliged to provide these mounting and operating instructions as well as the 
referenced documents to the operating personnel and to instruct them in proper operation. 
Furthermore, the operator must ensure that operating personnel or third persons are not ex-
posed to any danger.

Содержание 3259

























































Отзывы: