Samson 2439, Монтаж и эксплуатация

Страница: 32 / 40

32 EB 2185 EN
Malfunctions
6.5 Preparation for return ship-
ment
Defective devices can be returned to
SAMSON for repair. Proceed as follows to
return devices to SAMSON:
1. Put the device out of operation. See sec-
tion 8.1.
2. Decontaminate the valve. Remove any
residual process medium.
3. Fill in the Declaration on Contamination.
The declaration form can be download-
ed from our website at
u
www.samson.
de > Service & Support > After Sales
Service.
4. Send the device together with the filled-in
form to your nearest SAMSON subsidi-
ary. SAMSON subsidiaries are listed on
our website at
u
www.samson.de >
Contact.
7 Malfunctions
The malfunctions listed in Table 10 are
caused by mechanical faults and incorrect
regulator sizing. In the simplest case, the
functioning can be restored following the
recommended action. Special tools may be
required for repair work.
Exceptional operating and installation condi-
tions may lead to changed situations that
may affect the control response and lead to
malfunctions. For troubleshooting, the condi-
tions, such as installation, process medium,
temperature and pressure conditions, must
be taken into account.
SAMSON's After-sales Service department
can help during troubleshooting. Further in-
formation is available in section 9.
SAMSON's After-sales Service department
can support you in drawing up an inspection
and test plan for your plant.
Contact SAMSON's After-sales Service de-
partment for malfunctions not listed in the ta-
ble.
Tip
Note