Samson 2413 Series, Монтаж и эксплуатация

Страница: 48 / 52

48 EB 2517 EN
Appendix
10 Appendix
10.1 After-sales service
Contact SAMSON's After-sales Service de-
partment for support concerning service or
repair work or when malfunctions or defects
arise.
E-mail address
You can reach the After-sales Service De-
partment at aftersalesservice@samson.de.
Addresses of SAMSON AG and its subsid -
iaries
The addresses of SAMSON, its subsidiaries,
representatives and service facilities world-
wide can be found on our website
(
u
www.samson.de) or in all SAMSON
product catalogs.
To assist diagnosis and in case of an unclear
mounting situation, specify the following de-
tails (so far as possible). See section 2:
–
Device type and nominal size
– Model number and configuration ID
–
Upstream and downstream pressure
– Temperature and process medium
–
Min. and max. flow rate
– Is a strainer installed?
–
Installation drawing showing the exact
location of the regulator and all the ad-
ditionally installed components (shut-off
valves, pressure gauge etc.)
10.2 Spare parts
Version (2012 onwards)
2 Bellows assembly
6 Coupling nut
12 Balancing screw
16 Seat
17 Plug
20 Body
21 Guide cap
25 Guide (DN 32 to 100)
25, 26 Guide bushing/pipe (DN 15 to 25)
27 Flanged pipe
28 Washer
34 Flange
40 Set point adjuster
44 Stud bolt
46 Seal
51 Stud
52 Hexagon nut
70, 71 Spring
74 Spring plate
75 Seal
76 Axial needle bearing
77 Lock washer
79 Hexagon nut
80 Crossbeam
84 Washer
85 Seal
101, 102 Diaphragm case
103 Screw plug
104 Diaphragm stem
105 Diaphragm plate
106 Diaphragm washer
108 Diaphragm
111 Hexagon bolt
112 to 114 Hexagon nut
116 Washer
161 Lock pin