9
21. We recommend you cut the posts with a miter saw.
19. Lay the small leveling wood piece and a post together and
align “line 1”. Please note that line 2 should be
BELOW
line 1.
20. Extend the line 2 around the perimeter to the other sides of
the post using a square. This is the line you will need to cut.
22. If you are using a circular saw, cut the post from side-to-side
then rotate and proceed to cut through the post in this fashion.
23. AGach the post base to the boGom of the post. Align the
outsides and the four corners.
24. Fasten the post base to the boGom of the post with large
screws.
U
P
Post
The other posts should
be
LONGER
than the
line 1, the standard
post 1.
2
Line 1
