SAMSGAZEBOS 10-OCT-A Скачать руководство пользователя страница 2

Страница: 2 / 18

AMS

AZEBOS

Introducon

Thank you for purchasing SamsGazebos

products. These instrucons include helpful hints and informaon

necessary to safely assemble and properly maintain the gazebo for many years of enjoyment. Please read in-

strucons completely before you begin.

This gazebo has been designed for easy assembly with nominal pre-assembled parts for un uneven pao. All

steps can be completed in ﬁve hours by two people. If you have a level ﬂoor such as wood deck, e-mail us at

[email protected] at the me of order; we can make all posts same complete with hardware necessary at

no extra charge. Minimum ﬂoor required is 10’ x 10’.

Before Assembly

1. Make sure you have all the parts. Compare the contents of the crate to the List of the Parts. If any parts

are missing or you have any quesons, please contact Customer Service at (800) 376-7267.

2. Lay out the parts in separate staging area. We recommend you set aside the same parts together while you

go through the list; this step will save you me and eﬀort during assembly.

3. Select a locaon for your gazebo. Choose any area of your hard surfaced pao or cement pad. Trim down

overhanging trees and avoid underground pipes or cables before assembling the gazebo.

4. Check with your local building authories regarding any required building permits.

5. Prepare the tools and read the manuals.

6. Adjust sprinklers if necessary.

Tools Required

◊

8’ Ladder

◊

Level

◊

Tape Measure

◊

Hammer

◊

Square

◊

Pencil

◊

3/8” Socket Wrench

◊

Cordless Screw Driver & 1/8” or 3/16” Cordless Drill bit (to drill for lag bolts)

◊

Miter Saw / Circular Saw/ Handsaw (to adjust posts)

◊

Power Drill with a 3/8”drill bit (if installed on a cement pad)

◊

(other) Bloom, Work Gloves, Safety Goggles, Masking Tape, Sledge Hammer

Содержание 10-OCT-A



















Результаты поиска

Содержание 10-OCT-A

Отзывы:

Бренды по названию

Популярные бренды

SAMSGAZEBOS 10-OCT-A, Руководство по сборке

Результаты поиска

Содержание 10-OCT-A

Отзывы:

Бренды по названию

Популярные бренды