8
15. Using the level, find a corner for line 1. This corner should be
the highest and installaon point of standard post 1.
13. The lines indicate the height differences of the eight corners.
You will adjust the posts to make up the differences later.
IMPORTANT:
This corner marked
at top is the lowest
so that a post will
be longest.
This corner is the
highest and the
standard post 1 will
be installed.
1
14. Using a square, extend the line you marked as “1” around the
perimeter of the wood you have been marking in steps 12 &13.
1
1
1
16. Label the headers, the corners of the pao “1” to avoid
mistakes or confusion. Put standard post 1 next to them.
1
17. Go to the next corner. Flip the leveling wood piece to the
other side to avoid confusion, mark the level, and label it “2”.
18.
The line 2 (and the other lines) should be marked
ABOVE
line 1. If it is not, redo the step 10.
2
Line 1
Post 2 will be
this much
longer than
standard post
1 in this ex-
ample.
Please note
that the actu-
al difference
between the
two lines can
be smaller.
