Sams DigiKEY-1, Руководство пользователя по эксплуатации и обслуживанию

Страница: 8 / 16

DigiKEY
Inserters
elektronik
Sams elektronik d.o.o. • sams@sams.rs • www.sams.rs
8
1
2
3
4
FUSE: 500mA
220V/50Hz
POWER
www.sams.co.yu
Made in Serbia
DigiKEY-1
SN:
OUTPUT
PREVIEW
CVBS
PROGRAM EXT. REF. PROGRAM SDI FILL IN SDI KEY IN
INPUT INPUT
TCP/IP GPI
USE ONLY WITH A 250V FUSE
OUTPUT
PREVIEW
CVBS
PROGRAM EXT. REF. PROGRAM SDI FILL IN SDI KEY IN
INPUT INPUT
TCP/IP GPI
If everything is OK, LEDs will illuminate
(depending on settings)
Connect the power cord.
The device works only on AC ~ 230 V / 50 Hz.
Connect all necessary connectors
before the unit is turned on.
Turn on the device
by pressing the switch.
Connectors on the rear side of the unit
Rear side
Front side
TCP-IP
Connect the device to the local network.
Yellow LED lights up when
the cable is connected.
Green LED flashes
in communication with the device.
GPI
Connect the device
to the video mixer
External reference input
Device supports signal generator (like Sams MSG-2).
SDI
input
SDI FILL
input
SDI KEY
input
SDI
output
CVBS monitoring
SDI linear keyer
DigiKEY-1
www.sams.co.yu
TC
P
/I
P
G
P
I
R
EF
K
EY
FI
LL
P
G
M
1
TC
P
/I
P
G
P
I
R
EF
K
EY
FI
LL
P
G
M
2 3 4 5 6
INSTALLATION
FUNCTIONS
When device is ON:
For best signal quality, use:
- Belden 1694A coaxial cable for SDI
- Belden 8281 coaxial cable for analog video
1. TCP/IP (red LED) - LED flashes when in communication with the device.
2. GPI (red LED) - if the GPI cable is connected, the LED lights up, otherwise it is OFF.
3. REF (yellow LED) - if the reference cable is plugged in, LED lights up, otherwise it is OFF.
If the device works without analog reference, it is going synchronize on the SDI program signal.
4. KEY (green LED) - if the KEY cable is plugged in, LED lights up, otherwise it is OFF.
5. FILL (green LED) - if the FILL cable is plugged in, LED lights up, otherwise it is OFF.
6. PGM (green LED) - if the PGM cable is connected, the LED lights up, otherwise it is OFF.