SamplexPower SAM-450-12E Скачать руководство пользователя страница 15

14  |  SAMLEX AMERICA INC.    

  

   

SAMLEX AMERICA INC.  |  15

sectIOn 11  |  

warranty

2 YeAR LIMIteD WARRAntY

SAM-450-12E manufactured by Samlex 
America, Inc. (the “Warrantor“) is warrant-
ed to be free from defects in workman-
ship and materials under normal use and 
service. The warranty period is 2 years for 
the United States and Canada, and is in ef-
fect from the date of purchase by the user 
(the “Purchaser“). Warranty outside of the 
United States and Canada is limited to 6 
months. for a warranty claim, the Purchas-
er should contact the place of purchase to 
obtain a return Authorization Number. 
The defective part or unit should be 
returned at the Purchaser’s expense to the 
authorized location. A written statement 
describing the nature of the defect, the 
date of purchase, the place of purchase, 
and the Purchaser’s name, address and tel-
ephone number should also be included. 
If upon the Warrantor’s examination, the 
defect proves to be the result of defective 
material or workmanship, the equip-
ment will be repaired or replaced at the 
Warrantor’s option without charge, and 
returned to the Purchaser at the Warran-
tor’s expense. (Contiguous US and Canada 
only) No refund of the purchase price will 
be granted to the Purchaser, unless the 
Warrantor is unable to remedy the defect 
after having a reasonable number of op-
portunities to do so. Warranty service shall 
be performed only by the Warrantor. Any 
attempt to remedy the defect by anyone 
other than the Warrantor shall render this 
warranty void. There shall be no warranty 
for defects or damages caused by faulty 
installation or hook-up, abuse or misuse 
of the equipment including exposure to 
excessive heat, salt or fresh water spray, 

or water immersion. No other express 
warranty is hereby given and there are no 
warranties which extend beyond those de-
scribed herein. This warranty is expressly 
in lieu of any other expressed or implied 
warranties, including any implied war-
ranty of merchantability, fitness for the or-
dinary purposes for which such goods are 
used, or fitness for a particular purpose, or 
any other obligations on the part of the 
Warrantor or its employees and repre-
sentatives. There shall be no responsibility 
or liability whatsoever on the part of the 
Warrantor or its employees and repre-
sentatives for injury to any persons, or 
damage to person or persons, or damage 
to property, or loss of income or profit, 
or any other consequential or resulting 
damage which may be claimed to have 
been incurred through the use or sale of 
the equipment, including any possible 
failure of malfunction of the equipment, 
or part thereof. The Warrantor assumes 
no liability for incidental or consequential 
damages of any kind.

Samlex America Inc. (the “Warrantor”)
www.samlexamerica.com

Содержание SAM-450-12E

















Отзывы: