Samoa Larius Zeus Series, Руководство по эксплуатации, Страница: 23 / 50

www.larius.com 21
N
OFF
Clamp inserted
Clamp released
CORRECT PROCEDURE OF
DECOMPRESSION
N5
N2
N3
N1
zEus for sanitation
REV . 01 - 05/2020 - Cod. 150125
Make sure that the electrical system is earthed
and complies with regulations.
• Zero the pressure regulator knob.
• Move the switch (
N1
) to the
OFF (0)
position to stop the
equipment.
• Open the circulation - safety valve (
N2
) to discharge the
residual pressure, always turning it anticlockwise.
• Point the gun at the tank (
N3
) of the product and press the
trigger to release pressure. At the end of the operation, insert
the gun clamp (
N4
).
WARNING :
If the equipment is still under pressure after
performing the operations above described be-
cause of the nozzle or the flexible hose clogged,
proceed as follows:
• Loosen very slowly the gun nozzle.
• Release the clamp.
• Point the gun at the container of the product
and press the trigger to release pressure.
• Loosen very slowly the fitting of connection
from the flexible hose to the gun.
• Clean or replace the flexible hose and the
nozzle.