![background image](http://html1.mh-extra.com/html/samoa/larius-viking-liner-plus-2k/larius-viking-liner-plus-2k_operating-and-maintenance-manual_3750716022.webp)
CLEANING AT THE END OF
WORK
• Reduce pressure to the minimum
[turn counterclockwise the
pressure control knob (
P1
)]
.
3/4
P2
www.larius.com
20
VIKING LINER PLUS 2K
ED. 03 - 01/2021 - Cod. 150161
P
• At this point the machine will continue to suck the product
till the flexible hose is full, up to the gun, and then it will stop
automatically once reached the preset pressure.
• Turn slightly pressure regulating knob
(
O5
)
clockwise so that
the machine idles.
• Visually check that the product starts to re-circulate within
the tank.
• Close the re-circulation valve (
O3
)
and
(
O4
).
• Turn the pressure adjustment handle
(
O5
)
to the suitable
operation value
.
ADJUSTING THE INTERNAL COMBUSTION ENGINE SPEED
• Gently move the motor acceleration lever
(
O6
)
to increase
or decrease the speed of the pump.
During the painting operation it is normally recommended to
maintain the position of the accelerator lever
(
O6
)
at about
3/4 of its run.
• Turn off the engine by turning the ignition key (
P2
) anticlockwise
• Start the combustion engine following the indications provi
-
ded in the chapter
“STARTING COMBUSTION ENGINE”.
• Open the re-circulation valve
(
O3
)
and
(
O4
).
O5
O5
Fig. 5O
O6
Fig. 6O
P1
P1
Fig. 1P
Fig. 2P
O3
Fig. 3O
Fig. 4O
O4