Q
1
2
3
4
2
1
Fig. 1Q
Fig. 2Q
AIR TREATMENT GROUP CONTROL
Periodically check the air supply line to the pump. Make sure that the air is always clean and lubricated.
•
Periodically make sure that air supply remains clean and lubricated.
•
Periodically check the pressure plate gasket.
•
Follow the instructions given in the various component manuals.
•
With the button in the center position the faucet is semiautomatic, with collective absence and closing in case of pressure.
•
Press the button gets the condensate drain in a pressurised.
•
By turning the dial counter-clockwise you get manual closing of the tap (closing both in the presence and in the absence of
pressure).
•
To clean or replace the Insert loosen the screen of the group.
LUBRIFICATOR
•
For proper lubrication, set the lubrication through the screw, so as to dispense 1 drop approximately every 30 seconds.
•
Adjusting you can do by looking at the fall of the drop itself.
•
Keep lubricator cup filled with a mixture of water and antifreeze liquid (ratio 4:1). Refilling is necessary when the level is at a
minimum.
•
The oil level can be seen through the glass container. The container should be clean with a damp cloth before filling.
ROUTINE MAINTENANCE
Always turn off the air supply and release pressure in the system before any maintenance or inspection of the
pump. Before any maintenance disconnect the power supply.
www.larius.com
20
ED. 10 - 07/2020 - Cod. 150133
Pneumatic hoist twin mast for 200 litres
Содержание LARIUS PNEUMATIC HOIST 200
Страница 32: ...I n t e n t i o n a l l y b l a n k p a g e...
