www.larius.com
18
Omega 23:1-30:1
ED.
04 - 09/2021 - Cod. 150150
Q68
Q63
Q60
Q58
Q56
Q57
Q64
Q65
Q66
Q59
Q61
Q62
Q67
Q66
Q69
Q53
Q54
Q55
Q56
Q53
•
Insert the springs
(
Q53
) and the valves (
Q54
) into the seat (
Q55
).
Position the seat on the pump support and lay the manifold
(
Q56
) on the seat [do not forget the gasket (
Q57
)].
• Fasten the manifold with screws (do not tighten) ensuring
it is perfectly parallel to the other manifold and the
distance between them is 46 mm (see illustration).
The distance between the walls of the manifold and the edge
of the seat must be about 0,8 mm.
•
Rub the rollers
(
Q58
) and the pins (
Q59
) with vaseline grease
and insert them into the mount (
Q60
).
• Rub the rubber pad (
Q61
) and the washer (
Q62
) with vaseline
grease and insert them into the mount (
Q60
)
.
•
Grease the roller pushing pistons
(
Q63
), the spring guide rods
(
Q64
), the springs (
Q65
) and insert them into the mount (
Q60
).
•
Fasten without tightening the ring nuts
(
Q66
) on the mount
(
Q60
)
.
• Fasten the mount on the manifolds and tighten the screws
(
Q68
) [do not forget of washer (
Q67
).
• Tighten the ring nuts (
Q66
) and the screws (
Q69)
.
• Assemble again the covering and all the fittings of the air supply
line:
Fig. 9Q
Fig. 10Q
