www.larius.com
10
MINIPEGASO
ED. 05 - 09/2020 - Cod. 150168
WORKING
STARTING THE SPRAYING OPERATIONS
• Use the tooling after performing all the
SETTING UP
operations above described.
• Open the product delivery valve (
I3
)
to the gun and close
the recirculation valve
(
I4
).
• At this point, the product will flow until reaching the gun and
you can start working.
SPRAY ADJUSTMENT
• The product application nozzle can be adjusted according
to need by varying the pump operating pressure
(I5)
and
the atomization pressur
e (
I6
)
until reaching the necessary
operating conditions.
I1
I2
I4
I3
I5
I6
I
Before starting the pump, it is important to send
a small amount of atomization air to the gun.
Fig. 1I
Hold the cock (I1) slightly open, thus preventing
the product from returning to the atomization
air delivery circuit and clogging the gun and
the air delivery hose.
Insert the block (I2) to allow the air to escape
when filling the delivery hose with product for
the first time.
Fig. 2I
Fig. 3I
NEVER point the spray gun at yourselves or at
other people. The contact with the casting can
cause serious injuries.
In case of injuries caused by the gun casting, seek
immediate medical advice specifying the type of
the product injected.
Fig. 4I
Содержание LARIUS MINIPEGASO
Страница 16: ...I n t e n t i o n a l l y b l a n k p a g e...
Страница 30: ...www larius com 28 MINIPEGASO ED 05 09 2020 Cod 150168...
