background image

2 YEAR Limited Warranty 

 

 

This product  manufactured by Samlex America, Inc. (the “Warrantor”) is warranted to be free 
from defects in workmanship and materials under normal use and service.  This warranty is in 
effect for 2 years from the date of purchase by the user (the “Purchaser”) 
 
 If the defective product is within the warranty period, the Purchaser should contact the place of 
purchase to obtain a Return Authorization Number. 
 
 The defective part or unit should be returned at the Purchaser’s expense to the authorized 
location. A written statement describing the nature of the defect, the date of purchase, the place 
of purchase, and the Purchaser’s name, address and telephone number should also be in-
cluded. 
 
 If upon the Warrantor’s examination, the defect proves to be the result of defective material or 
workmanship, the equipment will be repaired or replaced at the Warrantor’s option without 
charge, and returned to the Purchaser at the Warrantor’s expense if within the warranty period. 
 
 No refund of the purchase price will be granted to the Purchaser, unless the Warrantor is un-
able to remedy the defect after having a reasonable number of opportunities to do so. 
 
 Warranty service shall be performed only by the Warrantor.  Any attempt to remedy the defect 
by anyone other than the Warrantor shall render this warranty void. 
 
 There shall be no warranty for defects or damages caused by faulty installation or hook-up, 
abuse or misuse of the equipment including exposure to excessive heat, salt or fresh water 
spray, or water immersion. 
 
 No other express warranty is hereby given and there are no warranties which extend beyond 
those described herein.  This warranty is expressly in lieu of any other expressed or implied 
warranties, including any implied warranty of merchantability, fitness for the ordinary purposes 
for which such goods are used, or fitness for a particular purpose, or any other obligations on 
the part of the Warrantor or its employees and representatives. 
 
 There shall be no responsibility or liability whatsoever on the part of the Warrantor or its em-
ployees and representatives for injury to any persons, or damage to person or persons, or dam-
age to property, or loss of income or profit, or any other consequential or resulting damage 
which may be claimed to have been incurred through the use or sale of the equipment, includ-
ing any possible failure of malfunction of the equipment, or part thereof. 
 
 The Warrantor assumes no liability for incidental or consequential damages of any kind. 
 
  
  
   
  
  
  
Samlex America Inc. (the “Warrantor”) 
110-17 Fawcett Road 
Coquitlam BC V3K6V2 Canada 
(800) 561-5885 
(604) 525-3836 
 
 
 
 

 

19. 

Содержание SEC-40BRM-220

























Отзывы: