Page 15
FEATURES, CONTROLS & INDICATIONS
Important : Each of the following operating procedures and safety features must be
carefully reviewed and thoroughly understood prior to using the inverter. Failure to
do so may result in damage to the inverter or equipment or serious personal injury
a
ON/OFF Switch.
This switch operates a low power control circuitry which in
turn controls the high power circuitry.
b
High Temperature LED Indicator Light.
This light will turn RED and the
inverter will automatically shut down when the internal temperature exceeds the
designed parameters for safe operation. When this occurs, turn the equipment or
appliance off.
c
Over Load LED Indicator Light.
This light will turn RED and the inverter
will automatically shut down when the continuous power draw from the inverter
exceeds the maximum continuous power rating for the inverter. Turn the inverter
OFF , determine and resolve the cause of the overload prior to resuming operation
of the equipment or appliance. Turning the inverter ON will re-set it.
