background image

230-2010_MC4-2_ Solar_Panel_Multi-Contact_Connectors_Manual_Jan2010

4

110-17 Fawcett Rd
Coquitlam, B.C.
Canada  V3K 6V2

T: 604 525 3836
F: 604 525 5221
TF: 1 800 561 5885

e-mail: [email protected]
website: www.samlexsolar.com

2 YEAR LIMITED WARRANTY

The MC4-2 Solar Panel Multi-Contact Connectors supplied by Samlex America, Inc. (the “Warrantor “) are 
warranted to be free from defects in workmanship and materials under normal use and service. This warranty 
is in effect for 2 years from the date of purchase by the user (the “Purchaser “).

For a warranty claim, the Purchaser should contact the place of purchase to obtain a Return Authorization 
Number. The defective part or unit should be returned at the Purchaser’s expense to the authorized location. 
A written statement describing the nature of the defect, the date of purchase, the place of purchase, and the 
Purchaser’s name, address and telephone number should also be included.

If upon the Warrantor’s examination, the defect proves to be the result of defective material or workmanship, 
the equipment will be repaired or replaced at the Warrantor’s option without charge, and returned to the 
Purchaser at the Warrantor’s expense.

No refund of the purchase price will be granted to the Purchaser, unless the Warrantor is unable to remedy 
the defect after having a reasonable number of opportunities to do so. Warranty service shall be performed 
only by the Warrantor. Any attempt to remedy the defect by anyone other than the Warrantor shall render 
this warranty void. There shall be no warranty for defects or damages caused by faulty installation or hook-
up, abuse or misuse of the equipment including exposure to excessive heat, salt or fresh water spray, or 
water immersion.

No other express warranty is hereby given and there are no warranties which extend beyond those described 
herein. This warranty is expressly in lieu of any other expressed or implied warranties, including any implied 
warranty of merchantability, fi tness for the ordinary purposes for which such goods are used, or fi tness 
for a particular purpose, or any other obligations on the part of the Warrantor or its employees and 
representatives.

DISCLAIMER OF LIABILITY

There shall be no responsibility or liability whatsoever on the part of the Warrantor or its employees and 
representatives for injury to any persons, or damage to person or persons, or damage to property, or loss 
of income or profi t, or any other consequential or resulting damage which may be claimed to have been 
incurred through the use or sale of the equipment, including any possible failure of malfunction of the 
equipment, or part thereof.

The Warrantor assumes no liability for incidental or consequential damages of any kind.

Samlex America Inc. (the “Warrantor”)

110-17 Fawcett Road

Coquitlam BC V3K 6V2  Canada

(604) 525-3836

Содержание MC4-2

Страница 1: ...f MC4 Connectors See Fig 1 The connectors can be crimped soldered to wire size AWG 10 or AWG 12 with an outer insulation diameter of 3 to 6 mm 1 Outer insulated housing 2A Tin plated Copper female mating contact 2B Tin plated Copper male mating contact 3 Nut with internal rubber bush for tightening the sealing around the wire entry 4 Crimping area 1 2A 6 3 2B 4 MC4 Female Connector PV KBT4 6I MC4 ...

Страница 2: ...s attempted 1 3 3 1 2 2 Fig 2 Snap in Locking System Wire Connections on Solar Panels See Fig 3 Most solar panels come with approximately 3 ft of Positive and Negative wire One end of each wire is connected to the junction box of the panel In most solar panels for example solar panels manufactured by Samlex Solar the other end of each wire is terminated with an MC4 connector The Positive wire has ...

Страница 3: ... use with AWG 10 or AWG 12 wire with outer insulation diameter 3 6 mm Wires may be single conductor Type UF Underground Feeder marked as sunlight resistant Type SE Service Entrance or Type USE USE 2 Underground Service Entrance 1 Strip 1 4 of the wire insulation using a wire stripper Take care not to cut individual strands 2 Insert the bare conductor into the crimping area 4 of Fig 1 of the metall...

Страница 4: ...ing a reasonable number of opportunities to do so Warranty service shall be performed only by the Warrantor Any attempt to remedy the defect by anyone other than the Warrantor shall render this warranty void There shall be no warranty for defects or damages caused by faulty installation or hook up abuse or misuse of the equipment including exposure to excessive heat salt or fresh water spray or wa...

Отзывы: