Samlex Europe WSC-1230, Руководство пользователя, Страница: 18 / 31

18
Warning!
Batteries with cell connection may NOT be charged.
Explosive gases could result from battery overheating.
Note
Only use cables with the designated wire cross sections to connect the charger to the battery.
Model No. Supply battery
WSC-1230, WSC-1230SB AWG # 10 ~ AWG # 8
WSC-1215, WSC-1215SB, WSC-2415 AWG # 12 ~ AWG # 10
WSC-2408 AWG # 14 ~ AWG # 12
Switch 1 Switch 2 I phase voltage Uo phase voltage U phase voltage
OFF OFF 13.5V/27.0V 14.0V/28.0V 13.5V/27.0V
OFF ON 13.5V/27.0V 14.4V/28.8V 13.5V/27.0V
ON OFF 13.8V/27.6V 14.4V/28.8V 13.8V/27.6V
ON ON 13.8V/27.6V 14.8V/29.6V 13.8V/27.6V
7 Making Connections
8 Settings
ENG
8.1 Charging voltage setting
The switch field S1 can be used to select the charging voltage, equalization voltage, charging
time and the operation mode of this charger (see Figure 11 Switch, Page. 7).
Warning!
Please follow the table below to ensure correct operation of the charger
Settings for the charging voltage for WSC-1215, WSC-1215SB, WSC-1230,
WSC-1230SB, WSC-2408 and WSC-2415:
Table 8-1 Switch Configure Charging Voltage
Table 8-2 Switch Configure Equalize Voltage
Switch 3 Equalization voltage
OFF Same as Uo phase voltage
ON 15.5V/31.0V