Samjung PLTDVCR600, Руководство пользователя

Страница: 14 / 41

13
MODEL NO.: PLTDVCR600,PLDVCR500/2002.10.01
INPUT 1
ANT IN
INPUT 2
REAR PANEL OF DVD-VIDEO
OUTSIDE ANTENNA OR
WALL ANTENNA OUTLET
REAR PANEL OF TV
RF CABLE
INPUT 1
ANT IN
INPUT 2
REAR PANEL OF TV
AUDIO/VIDEO CABLE
REAR PANEL OF DVD-VIDEO
Connecting with TV
How to Connect with RF cable
■
In the initial SET, exclusive channel for video is set to CH 3. To change this setting, set again in
“ CHANNEL SET ” screen in VCR operation.
■
In connecting RF cable to TV, set TV channel to CH3.
1. Remove circular cable (RF cable) (surplus cable) plugged in “ ANT.IN ” Jack in rear panel of TV. Connect the
cable to
“
ANT.IN
”
jack in rear panel of DVD-Video.
2. Connect TV to DVD-Video. Connect
“
RF OUT
”
jack in DVD-Video with
“
ANT.IN
”
jack in TV with RF cable.
3. (If there is AUDIO/VIDEO INPUT jack in TV)
Connect VIDEO OUT jack in DVD-Video to VIDEO IN jack in TV, and AUDIO OUT jack in DVD-Video to
AUDIO IN jack in TV with connecting cable of Audio/Video jack.
Select VCR mode by pressing TV/INPUT button in TV, you can view more clear screen and sound than
connection with RF cable only.
VHF: 2 ~13 channels of TV
UHF: 14~69 channels of TV
CATV: Broadcasting is transmitted with cable from broadcasting station by contract with the station and
consumers. It does not need any antenna.
In/Out jack in Audio/Video terminal:
- In: A jack used to receive signal required in this unit from other units.
- Out: A jack used to send signal of this unit to other units.
Connect with Audio/Video terminal, you can enjoy more clear video and audio.
(Use A/V Sel button in this REMOTE to select video mode.)
CHECK UP! CHECK UP!
Connecting with TV