Samjung PLTDVCR600, Руководство пользователя

Страница: 40 / 41

MODEL NO.: PLTDVCR600,PLDVCR500/2002.10.01
40
Symptom
A screen is not clear.
A screen at pause is trembling or
slow screen is not clear.
Checks
- In case videotape is the one recorded by other products or old
one, stripe may appear on the screen.
- Try to adjust the screen by [T/-] button
- Try to use a head-cleaner.
In spite of pressing
“
CHANNEL
”
,
a channel can not be set.
- You may not memorize channels.
- Please check your channel setting or press a number button.
While duplicating, screen is not
clean and distorted.
- Try to use a head-cleaner.
- Try to adjust the screen
Recording a TV program is
impossible.
- For recording, you should use videotape with a tab.
- Please check whether a channel is fixed on video. If not, you
have to turn it into
“ TV ” by pressing “ OUTPUT ” button.
- Are RF cables inputted antenna connection terminal correctly?
- Does a CH number selected in display section appear?
- Please check a tab on a tape whether it is broken or not. (If it was
broken, please scotch-tape it)
- Check whether a tape attached with a recording tap is inserted.
- Is the rounded line (RF cable) connected in "ANT.IN" terminal?
- Is the selected channel number shown in Display?
- Is a tab of cassette tape broken? (Please cover a tab hole with
cellophane adhesive tape (Scotch tape).)
remote control does not work.
- Some tapes or discs distributed in the market for lending is set to
prevent copy in manufacturing. These tapes cannot be
duplicated in a good condition.
Buttons on remote control do not
work.
- Battery may be weak or exhausted.
- A receiver of remote control may be different with a sender.
- In case a videotape is positioned in the beginning,
“
VISS REW
”
and
“
REW
”
do not work.
- In case a videotape is positioned in the end,
“
FF
”
,
“
VISS FF
”
,
“
PLAY
”
and
“
REC
”
do not work.
- Please check whether another button is pressed.
Cable broadcasting can not be
selected.
- Please select “ CABLE ” not “ NETWORK ” from the “ CHANNEL
SETTING ” .
Operating time
* Spin-up time : Less than 13 sec (Typical)
* Stop time : Less than 2 sec(Typical)
Laser parameters
* DVD
Semiconductor Laser / Wave length : 650nm /
Emission power : 0.28 mV
*CD
Semiconductor Laser / Wave length : 780nm
Emission power : 0.30 mV