Installation
13
●
The ambient temperature is out the range of -20°C to +60°C
●
The altitude 2,000 m above sea level.
●
Prone to be damaged by water.
●
Close to corrosive gas or liquid (for example, locations where chemicals are processed or the location
where feed lots of poultry).
●
Exposed to direct sunlight.
●
Prone to be flooded or covered by snow.
●
Little or no air flow.
●
Exposed to steam, vapor, or water.
●
Exposed to direct cool air.
●
Near the television antenna or antenna cable.
The inverter is needed at least 30 cm (see figure 8) clearance. If not observe this there will be malfunction
of the system caused by water or high temperature inside the inverter.
Fault because of the above case is not in the scope of warranty.
Figure 8 Space specification
Choose inverter installation position:
●
Inverter must be installed on a solid surface which bears the weight of the inverter;
●
Tilted degree should not exceed 15 degree, as figure 9:
●
Terminals of inverter must be face down;
●
Can not be installed horizontally.
Figure 9 incorrect installation
max 15
30cm
30cm
30cm
30cm
S o l a r R i v e r
Normal
Fault
OK
ESC
