Installation
This product is equipped with IP66 AC connector. You can connect inverter AC side by yourself. Please
see figure 15 for AC connector disassembling guide.
Figure 15 AC connector disassembling guide
Assembly steps of AC connector are as following
：
Step1: Put the AC wire through the threaded sleeve and pressure screw.
Step2: Wire the AC side refer to following instructions.
• Screw the green-yellow wire to the ground terminator in the AC Connector
• Screw the N wire (blue wire) to the N(Neutral) terminator in the AC Connector.
• Screw the L wire (brown or black wire) to the L(Line) terminator in the AC Connector.
Step3: Confirm all the wires should be screwed down.
19
Threaded sleeve
Pressure screw
N
L
Socket element
Threaded sleeve
Connected wires
Pressure screw
