Installation
16
5
Installation
Valve
PNEUMATIC CONNECTIONS
Fit an air hose (
4x6) to supply the valve with compressed air.
Connect it to the compressed air network via a pressure regulator.
ELECTRICAL CONNECTIONS
Connect the M8 connector control cable to the distributor
5.1
Connections
Make sure that all connections of the components of the
valve - cables, hoses and pipes - are installed in such a way
as to avoid causing a fall of people.
Make sure that the order of connection of cables, hoses and
hoses is in accordance with the connection diagram.
Ensure that all cable connectors, hose connectors and
hoses are properly in place.
Remember that loose or incorrectly connected cables,
hoses and pipes can lead to malfunctions that endanger
the safety of the operating personnel.
5.1.1
Product supply connection
If the supply pressure is higher than the max pressure, it is
necessary to install a product pressure regulator in front of
the valve.
Ensure that a short product hose reduces pressure
fluctuations and pressure drops.
5.1.2
Air supply connection
Ensure that a short air duct reduces pressure fluctuations
and pressure drops.
