SAME RUBIN 160, Руководство по ремонту

Страница: 16 / 41

00-14
SYMBOL CODE DESCRIPTION NOTES
T30
5.9030.480.0 Installer for high-pressure Orbitrol ring
T31
5.9030.501.4 Installer for steering cylinder oil seal
T32
5.9030.876.0 Reference dowel for injection pump installation
T33
5.9030.875.0 Centering tool for injection pump control rod
T34
5.9030.870.0 Wrench for holding HML input shaft
T35
5.9030.692.0 Wrench for main clutch locknut
T36
5.9030.691.0 Main clutch spring compressor
T37
5.9030.704.4 Service screws for assembly of M - L clutches (Qty. 6)
T38
5.9030.871.0
Air jet tool for expulsion of H clutch piston and for checking
maximum piston stroke
T39
5.9030.872.0 Tool for overhaul of M - L clutches
T40
5.9030.708.0 Box wrench for ring nut 2.1219.039.0/20 - 2.1219.039.0/10
T41
5.9030.854.0 Spacer Ø 60 - Ø 45 l=60 (adjustment of primary shaft)
T42
5.9030.855.0
Spacer Ø 60 - Ø 45 thickness 4 mm (adjustment of primary
shaft taper roller bearings)
T43
5.9030.856.0 Internal and external struts for transmission removal
T44
5.9030.736.0
Tool for installing primary bearing “A”, secondary bearing “B”
and studs “C”
T45
5.9030.857.0 Tool for holding secondary shaft when tightening ring nut
T46
5.9030.390.0 Copper mallet
General
purpose tool
T47
5.9030.873.0 Tool for installation/removal of primary shaft
T48
5.9030.865.0 Installer for rear PTO oil seal Installer for rear PTO oil seal
T49
5.9030.719.0 Special wrench for intermediate timing gear
T50
5.9030.720.0 Box wrench for pinion shaft
T51
5.9030.529.0 30 kg Spring dynamometer
T52
5.9030.866.0 Installer for 4WD gear spring
T53
5.9030.867.0 Brake discs support (forcella)
T54
5.9030.869.0 Box wrench for splined 4WD shaft (ring nut tightening)
T55
5.9030.868.0 PTO clutch spring installer
T56
5.9030.494.0
Tool for tightening rear PTO output shaft ring nut Tool for
tightening rear PTO output shaft ring nut
SPECIAL TOOLS