Doc.-ID: 211007-PT08BA-ES-ExCam XI80_en_rev.00.docx, Page 21 of 28
To do this, go to
All
Control Panel Items
and open the
Network and Sharing Center
.
Go to
Ethernet
.
In the register card
General
, activate the
check box
“Use the following IP address”
.
Now enter a
user-defined IP address
for
your PC (192.168.0.100). This must be iden-
tical to the address set in the PIX Connect
software.
2.
Then close the window with
OK
. The network
settings on the PC are complete.
Now press
Properties
.
Now select
Internet Protocol Version 4 (TCP
/ IPv4)
in the properties window and then go to
Properties
again.