background image

Receive
Frequency

Receiving Status

Group Call Status

Battery Information
Battery on First Use

Since batteries leave factory without a fully charging, please charge the new batteries before using. Under normal circumstances, the
battery on first use needs 5 hours of charging. The first three times of fully charging and discharging provides batteries the best capacity.
When you find out the battery is low, it is required to charge or replace it.

Compatible Battery Type

Please use the  specific battery for the use of other batteries may cause explosion, resulting in bodily injury.

Safety Precautions

1. Do not dispose the batteries in the fire.
2. Do not dispose the batteries as household wastes, and it must be collected and treated properly.
3. Do not rip off the shell from the battery without permission.

p

y

p

Notes:

1. When charging, the temperature should be between 5

~40 

,otherwise it may cause the leakage or even damage the battery.

2. Please shut down the transceiver with battery loaded before charging it. The use of the transceiver while charging is ongoing
will affect the normal battery charging.
3. Do not put back and charge the battery that is already full, for it will significantly reduce the cycle life.
4. Since continuous charging will shorten the life of the battery, it is unwise to place the transceiver or battery on the charger, or take
the charger as a placement seat for the transceiver.
5. Do not charge the battery when it is wet. You should dry it first in order to avoid any danger.
6. If the battery’s usage time is very short even when it has been charged in completely correct way, it can be concluded that the
battery life is due and should be replaced by a new one.

Extension of Battery life

1. The performance of the battery will be reduced when the temperature drops below 0

. In cold weather, it is advised to

spare another battery for emergency. Please do not dispose the cold batteries that can not work at low temperature but may be
usable at room temperature.

Содержание FPCN30A

















Отзывы: