background image

If you use the transceiver while driving, please note the following:

Concentrate on driving, pay attention to the situation of the road. If possible, try to use the walkie-talkie-free function operation.
If the provision of using the transceiver while driving prohibited, please drive the car to the roadside stop, and then make a call.

Operation warning

Car with an airbag

In the car with an airbag, do not put the transceiver within the reach of the expansion of the airbag, because
the airbag inflates with great force. If the transceiver put within the reach of expansion of the air bag, when the
airbag inflates, the transceiver may be driven by the tremendous force generated, resulting in severe injuries
inside the vehicle.

Possible gas explosion

Some places have potentially explosive gas, if your handheld transceiver can not be safely used in these
types of places (such as factory, CSA, UL or ENELEC), please power off it before entering the places. Shall
not remove, install the battery or charge to the battery in these areas. Because of such gases in the spark
will cause an explosion or fire resulting in casualties. Mentioned above with a potentially explosive gas areas
include:
Fuel zone, like the area below deck on boats, and the transmission or storage sites for fuel or chemical
agents; places where air contains particles, like chemicals or such as straw, dust or metal powders.

g

; p

p

,

,

p

Areas contain potentially explosive gases will have general warning, but not all areas have this warning.
Fuse and blasting areas
To avoid possible interference with blasting operations, please switch off your transceiver when get close to
blasting areas and areas where deployed some detonators. Those places posted with the words to
switch off wireless radio, you have to turn off it. Please observe all signs and instructions.

      To prevent the magnetization

       With weak external magnetic of transceiver speakers, please keep your transceiver larger than 10cm away from TV sets, computer
       monitors etc, to avoid being magnetized.

Notes

Antenna

       Caution Not use the handheld transceiver with damaged antenna. It will cause skin mild burns if touch the damaged antenna.

Содержание FPCN30A

















Отзывы: