Samba W-Clean 900, Инструкция по эксплуатации

Страница: 29 / 104

29
English
The white side of the Cleaning Pad attaches to the Velcro,and the gray
microfiber side faces out. Make sure the Cleaning Pad does not cover
the Edge Detection Sensors, front bumper sensor and rear bumper
sensors.
• Install the SafetyTether
To install the security anchor, follow the steps shown in the following
images:
A C D B
A. Power
Cord
B. Power Adapter -
Power Cord
C. Safety Pod D. Safety Tether
1º Loop one end of
the Safety Tether to
end A on the The
robot Power Cord
andtight.
2º Connect end A and end B
and tight.
3º Haga un lazo con el
otro extremo del anclaje
de seguridad alrededor de
la cápsula de seguridad y
apriete con fuerza.
BA
CAUTION:
* If the length of the power cord restricts The robot ’s movement, a The
robot Extension Cord can be used. Disconnect en d A and end B, and
connect them with both ends of the Extension Cord respectively and
tight.
* Only one Extension Cord can be used for The robot .