Samba W-Clean 900, Инструкция по эксплуатации

Страница: 37 / 104

37
English
S t a t u s
Indicator light
flashes RED
The robot has
moved over a
problem area and
is losing suction.
Please use the Direction Stick on
the Remote Control to direct The
robot to a Safety position.
CAUTION: It is risky to use
direction stick command unit,
please make sure there is always
people standby the product.
Edge Detection
Sensors are with
problem
Please check if edge detection
sensors was stucked and clean the
dirts oni t. If it still does not work,
please contact customer service.
Status
Indicator
light flashes
BLUE when
The robot
adhered to
glass
Cleaning pads
was installed
improperly
Remove the cleaning pad and
adhere neatly onto the Velcro.
Edge detection
sensors with
problem
Check if the edge detection
sensors was stucked by cleaning
pad or dirts.
There is too
much dirt and
debris on the
window.
Clean the window by hand to have
a clean area for the The robot
adhere to first.
Unit moves
in an irregular
Pattern during
cleaning.
There is too
much dirt and
debris on Glass
on the window.
A. Clean the Driving Treads as
described in “Maintenance”.
B. Replace the Cleaning Pad and
restart the cleaning cycle.
PRECAUCIÓN: The robot is
not suitable for too dirty glass
R e m o t e
control does
not work
While the The
robot is in
cleaning mode,
only the “START/
PAUSE” button
works
Press “START/PAUSE” button
to stop cleaning first, then press
other buttons to command The
robot.
Unit didn’t matched code with Remote control or
match failure