SaMASZ SAMBA 160, Руководство оператора

Страница: 19 / 42

Instrukcja obsługi
Operator's manual
Lightweight, rear disc mowers
SAMBA
- 17 -
Fig. 7. Mower mounted on tractor
After the mower has been attached to tractor, check the balance and steerability of tractor-mower
set. To do this, calculate to formulas given in the appendix or weigh the set, and then drive on the
scales only with front axis of the tractor (the mower must be in transport position
–
lifted upwards). If
the pressure on the front axis is at least 20
% of the whole set’s pressure, it mean
s the set is stable. If
not, the front axis should be balanced.
WARNING!
Prior to dismounting mower from tractor put safety pin (
1
) into a hole (
3
) in
cutter bar to protect hitch from falling. With mower mounted on place the pin in
bushing (
2
) (
Fig. 8a
) found on central beam.
Fig. 8. a) 1
–
safety pin, 2
–
bushing, 3
–
hole in cutter bar, b) Z
–
locking pawl
5.2. Mounting PTO shaft
PTO shaft should be mounted with overrunning coupling from the mower side.
The guard should be protected against rotating by securing the shaft set chains to immovable
parts of the tractor and the mower.
WARNING!
If need be shorten PTO shaft as provided in corresponding shaft operator's
manual (
Fig. 9 ).
L S
A W
B
Z
b) a)
1
2
3