Instrukcja obsługi
Operator's manual
Lightweight, rear disc mowers
SAMBA
- 9 -
4.2. Qualifications of operator
To provide safe machine operation each person being the machine operator must meet the
following requirements:
❑
Operator should hold driving license, have ability to drive vehicles safely and know road traffic
rules.
❑
Operator must be in proper physical condition to be able to operate the machine.
❑
Operator must not be under the influence of alcohol, drugs and medicines, which all have influence
on vehicle driving and machine operation.
❑
Operator should be familiarized with this manual and follow its provisions.
❑
Operator should be familiar with working principles of both the tractor and the machine, and be
able to recognize and avoid hazards resulting from operation of the aggregate.
4.3. Conditions of mounting mower on tractor
❑
Prior to the mounting operation, check whether the tractor's and the mower's hitch categories are
compatible and make sure that tractor's hitch load is adequate for the machine aggregated.
❑
When mounting the machine, examine technical condition of the mower's hitch assembly
and tractor's 3-point linkage.
❑
Use only genuine pins and cotters to mount the mower on a tractor.
4.4. Transport
❑
Any modifications in the mower's position are possible only if no unauthorized personnel is around
(children in particular).
❑
When transported the mower shall have warning triangle mounted for a slow driving vehicle.
❑
When transported the mower should always be set in transport position. See item
5.3
.
❑
Prior to shifting the mower to transport position make sure, that the tractor PTO is disconnected
and all the rotating parts in complete standstill.
❑
Driving speed should always be adjusted to current road conditions.
❑
Driving speed should always be adjusted to current road conditions and local traffic rules.
❑
No person and no objects must remain on the mower when driving or transporting.
❑
When taking turns pay particular attention and consider the machine's weight and dimensions.
4.4.1. Relocating mower onto another vehicle for transport
Both the carrier and the driver shall be responsible for the mower's transport safety. Any
equipment and parts must be secured properly for transport.
In order to safely relocate the mower onto another vehicle, please follow these rules:
❑
seize the mower by any lifting device only in places indicated on the machine with the hook sign
(
❑
to lift the mower, use only lifting devices with hoisting capacity bigger than the mower weight
provided on data plate. It also applies to ropes and chains used for lifting,
❑
transport belts, belt suspensions, ropes cannot be damaged. Whenever damages to these parts are
spotted replace these with new ones,
❑
when mounting slings, chains, handles etc. always pay attention to setting the machine's center of
gravity properly,
❑
to catch machines, pick ropes of adequate length, so that the angle between them is no greater than
120°, and the angle between the strand and the vertical is no greater than 60°
,
