Operator’s manual
Rotary tedder
P4-420
,
P4-471
and
P4-531
Rotary tedder
P6-651
and
P6-771
Rotary tedder
P8-790
and
P8-890
- 21 -
When driving on public roads the machine overall width should not be greater than 9' 10"
(3m). Since the SaMASZ tedder operating height of drive wheels can be is adjustable, change of
this setting may lead to alternation of the machine transport width when folded. Therefore, the
tedder transport width should be controlled prior to driving onto public roads and if needed wheels
1
setting should be changed (
Fig. 12
).
WARNING!
It is forbidden to drive on public roads it the transport width exceeds
9' 10"
(
3 m) and the transport height exceeds
13' 2" (
4 m).
5.4.
Mounting PTO shaft
PTO shaft’s end with friction clutch should be mounted on tedder’s side.
The PTO shaft plastic guards have to be secured by fastening their small chains to immovable
parts of tractor and tedder.
Prior to commencing operation, examine and adjust length of PTO shaft, which is designed to
mount machine on tractor. In some cases it is possible, that the shaft is too long and therefore needs
to be shortened, so that there is adequate tolerance for the shortest possible distance between
tractor’s shaft and machine’s shaft.
Shaft's length should be adjusted individually for the tractor, on which the machine is
mounted.
NOTICE:
If need be, shorten the PTO shaft according to its operator’s manual given by the shaft’s
manufacturer (
Fig. 13
).
Fig. 13.
Instruction of PTO shaft shortening
NOTICE:
The PTO shaft should be mounted only during operation time and disconnected from tractor
PTO for transport and service
