SaMASZ KDT 220, Руководство оператора

Страница: 8 / 52

8
KDT REAR DISC MOWER OPERATOR’S MANUAL
3.2. Design and working principle
3.2.1. Rear disk mower
Fig. 3a. Parts of KDT rear disc mower
1 – 3-point linkage frame
2 – Hydraulic cylinder with support springs
3 – V-belt drive
4 – Cutterbar
5 – Swath discs
6 – Safety curtain
3-point linkage frame ( 1) enables attachment of the mower to tractor’s 3 -point linkage. Drive from
tractor’s rpm is transmitted through V -belt drive ( 3) on the cutterbar ( 4 ). Hydraulic cylinder ( 2) is used
to adjust the mower to working position. It is supplied from outer hydraulics of the tractor. Main frame,
on which the cutterbar (
4 ) is situated, is supported by the springs ( 2 ). Swath discs ( 5) are mounted on
the main frame.
3.3. Rear disk mower with tine condioner
Fig. 3b. Parts of KDT rear disc mower with tine conditioner
1 – 3-point linkage frame
2 – Hydraulic cylinder with support springs
3 – Axis gear
4 – Cutterbar
5 – Swath discs
6 – Tine condioner safety curtain
7 – Tine conditioner
8 – V-belt drive
9 – Tine condioner PTO shaft
10 – Support legs
1
2 3
4 5 6
1
2
3 4 6 5 10 9 8 7