SaMASZ KDT 220, Руководство оператора

Страница: 21 / 52

21
OPERATOR’S MANUAL REAR DISC MOWER KDT
5.1. Attaching the mower to the tractor
WARNING!
❑
Only hitch and unhitch machine on a flat surface with compact dirt.
❑
Keep everyone away from area between mower and tractor.
❑
Be careful near link road zone of tractor's rear power lift. Contains sharp parts.
❑
Any accidental maneuvering with the set may cause to crushing of
unauthorized personnel
Mower’s frame is adjusted to be attached to the tractors with 3 -point-linkage ( Fig. 8 ).
The mower has been attached, adjust (on the flat ground) the mower’s position by means of top S and
lower W links. The cutterbar should lean towards the driving direction.
Secure the adjustable pin with the bolt ( R ), next counter-screw the mounting with a nut ( N ) ( Fig. 9 ).
WARNING!
Proper securing of the pins must be inspected regularly before using the mower.
Lower links
W should be connected to 3-point linkage frame pins A . Support chain L holds up mower’s
linkage frame. Insert and tighten the safety pins into the pin holes and make sure that they are well
locked.
Connect hydraulic hose to tractor’s hydraulic connector.
Fig. 8. Connecting the mower to the tractor
Fig. 9. Proper pin locking during the mower mounting
Ł S
A W
B
R
A
N