Operator’s manual
Double-sided disc mowers
with central suspension
- 35 -
Tab. 5. Oil capacities in intersecting axis gears
Model
Oil capacity
[l]
Oil type
Lubrication frequency
All type
1
Transol 680 ÷ 1000
(acc. to ISO 3448 oil viscosity
grade: VG-680 – 1000 )
Once every 3 seasons
(if working intensively more
frequently)
Gears
52-01.0100AB.L
53-01.0100AB.L
(mowers KDD 941 ST,
KDD 861 ST)
2.5
Transol 680 ÷ 1000
(acc. to ISO 3448 oil viscosity
grade: VG-680 – 1000 )
Once every 3 seasons
(if working intensively more
frequently)
CAUTION:
The above instructions should be strictly followed. If the discs in
the cutterbar rotate loosely, do not worry about high intersecting axis
gear temperature; after long working time it may reach even 100
o
C.
7.3.
Roller conditioner’s gearbox
Before you check the lubrication of the gearbox, please remove the safety guard. Everyday
before starting work please check the oil level and, if needed, please refill after having removed
the vent A on the top of the gearbox (Fig. 38) The oil level can be checked through the check
opening B on the side of the gear. Please refill the oil until it is visible in the check opening B.
The oil level: about 0.5 l. Check oil level when the cutterbar is on the ground. Removing the
worked oil from the gearbox is done through the outlet C.
Tab. 6. Oil capacities in roller conditioner’s gearbox
Fig. 38. Roller conditioner’s gearbox
lubrication points
Fig. 39. Bearing lubrication point with LT43 grease
Model
Oil capacity [l]
Oil type –
for gearboxes
Lubrication frequency
Oil type
0.5
80W90
Once every 3 seasons
(if working intensively)
A
C
B
Lubrication
points
