Operator’s manual
Double-sided disc mowers
with central suspension
- 31 -
6.8.
Conveyor control and adjustment
(For model: KDD 860 S/W+T, KDD 940 S/W+T)
6.8.1.
Cleaning method of belt and rollers
CAUTION:
Check conveyor belts condition once per hour of operating. In the event
of finding bulges caused by rolling the grass onto rollers, clean it with
use of lever and remove the grass. Using conveyors with bulged belts
may lead to their premature wearing.
Conveyor belts are not subject to warranty.
1. In order to clean roller switch lever D when rotating belt to 1 and hold until bulges disappear
(Fig. 29). This should also be performed from the other side of conveyor if necessary.
Fig. 29. Cleaning of conveyor rollers
2. Impurities inside belt are removed once conveyor is in vertical position. Belt is deflected with
hand and then impurities are removed with a hook wire.
Fig. 30. Removal of contaminants inside the conveyor
D
1
utbuktningar
1
