Operating manual
Rear- side flail mowers on a pantograph
KBRP ; Kangu
- 12 -
❑
Thermostat turns ventilator
for cooling oils for temperature over 60ºC on, if oil is heated up to
80º interrupt work and find cause of high temperature.
❑
Scotch tape shall never be used to repair damaged hydraulic hoses.
❑
When connecting hydraulic hoses to tractor hydraulic connectors make sure, that either tractor
or machine hydraulics are pressure free.
❑
When operating hydraulic unit, always wear protective gloves and eyewear. Leaking hydraulic
oil under pressure (16 MPa) may permeate through the skin and cause an infection. If
experienced, immediately visit a doctor.
❑
Caution! Hydraulic assembly is under pressure! Hydraulic oil under pressure may permeate
through skin and cause serious injury, therefore skin and eyes should be protected in particular.
In case of injuries caused by a liquid under pressure, call a doctor immediately.
❑
Hydraulic hoses can be connected to tractor's hydraulics, provided that both the tractor’s and the
machine's hydraulic assemblies are not under pressure. To remove the pressure from the hoses
just simply restart the tractor's hydraulic valves several times, once the tractor is off.
❑
When controlling for hydraulic assembly's malfunction and looking for oil leaks, it is forbidden
to touch any potential leaks until the entire assembly is under pressure.
❑
Note! It is recommended that the hydraulic oil used should not exceed 10 oil purity class in
accordance with NAS 1638.
When using hydraulic hoses:
❑
Avoid stretching the hoses when operating.
❑
Do not allow hydraulic hoses to get deflected.
❑
Do not expose hydraulic hoses to contact with any sharp edges.
❑
If damaged or worn, replace the hoses with new ones.
❑
Useful life for hydraulic hoses is 5 years from their production date.
4.8.
Residual risk
Despite the fact, that SaMASZ Sp. z o.o. company
–
the manufacturer of the machine takes
the responsibility for the machine design and manufacturing, in order to eliminate hazard, certain
risk when operating the machine is unavoidable.
Major source of risk results from the following operations:
❑
operation of machine by minors and operators not being familiarized with operator's manual,
❑
operation of machine by personnel under influence of alcohol or other abusive substances,
❑
failure to keep caution while transporting and moving the machine during operation,
❑
transport of personnel on the machine,
❑
presence of personnel and animals within the machine operating range,
❑
service and adjustment operations with engine running.
1. Risk of being caught and pulled in
This risk occurs when repositioning of the machine, or working on the machine while the
rotating elements are in motion and with guards removed.
During operation, maintenance or adjustment works on the machine always use protective
gloves, covered footwear, protective clothing without loose elements, such as belts etc. Always
observe the warnings placed on the machine.