SaMASZ Kangu 140 Скачать руководство пользователя страница 11

 

Operating manual 

Rear- side flail mowers on a pantograph 

KBRP ; Kangu 

 

- 9 - 

 

When  servicing  hydraulic  unit,  always  wear  protective  gloves  and  eyewear.  Hydraulic  oil 
leaking  under  pressure  (16MPa)  may  permeate  through  the  skin  and  cause  its  infection 
thereafter. If this is the case, immediately visit a doctor. 

 

The machine should be stored under a roof and in such way so as to effectively prevent animals 
and people from being injured 

 

Before starting the machine, make sure there are no animals underneath the guard 

 

Before  operating  the  machine,  make  sure  all  safety  devices  are  in  place  and  working.  If  not 
working or damaged have them replaced 

 

Before any maintenance, assembly, disassembly works and when parking position the machine 
on a solid ground and secure it against accidental movements. 

 

When cleaning the machine, use personal protective equipment for health protection. 

 

Do  not  leave  agricultural  machinery  on  slopes  or  other  descents  without  providing  protection 
against free runaway. 

 

When operating on a stony field or nearby roads there is a risk of throwing out stones or other 
objects  which  may  pose  a  danger  for  passing-by  vehicles  on  the  road  or  for  passers-by. 
Therefore keep the safe distance. 

 

If any break in the equipment operation occurs, turn off the drive. Before leaving the tractor turn 
off  the  engine  and  remove  the  ignition  key,  leave  the  cabin  and  make  sure  there  are  no 
unauthorized personnel in the cabin and close the door. 

 

The operator is not allowed to leave the tractor while driving. 

 

In case of a major failure, stop the machine's drive, turn off the tractor's engine and remove the 
ignition key. Next, please contact technical service, and if accident (i.e.: road accident) occurs, 
respect first aid rules and call appropriate authorities. 

 

Keep the machine clean, so as to avoid a risk of fire. 

 

Pay particular attention to both PTO shaft and spline shaft guards. Never operate with damaged 
guards. 

 

Rotating  spring  tines  and  other  rotary  elements  present  a  danger  to  health  and  life  of  persons 
present nearby the machine. Do not touch any moving machine parts 

 

Check pressure in the machine wheels regularly.  

 

In the event of any break in the equipment operation, turn off the drive. 

 

In the event of a fatal failure, please call for technical service, and if an accident (in this case: 
road accident) occurs, respect first aid rules and contact responsible services.

 

 

4.2.

 

Qualifications of operator

 

To  provide  safe  machine  operation  each  person  being  the  machine  operator  must  meet  the 

following requirements: 

 

Operator should hold driving license, have ability to drive vehicles safely and know road traffic 
rules. 

 

Operator must be in proper physical condition to be able to operate the machine. 

 

Operator  must  not  be  under  the  influence  of  alcohol,  drugs  and  medicines,  which  all  have 
influence on vehicle driving and machine operation. 

 

Operator should be familiarized with this manual and follow its provisions. 

 

Operator should be familiar with working principles of both the tractor and the machine, and be 
able to recognize and avoid hazards resulting from operation of the aggregate. 

 

4.3.

 

Conditions of mounting mower on tractor  

 

Prior to the mounting operation, check whether the tractor's and the mower's hitch categories are 
compatible and make sure that tractor's hitch load is adequate for the machine aggregated. 

 

Prior to mounting the machine, examine technical condition of the mower's hitch assembly and 
tractor's 3-point linkage. 

 

Use only genuine pins and cotters to mount the mower on a tractor. 

 

Содержание Kangu 140




































Отзывы: